Procedure for Operations Performed on the Sample

Procedure for the acceptance, coding, storage, return and disposal of samples.

Procedure for Operations Performed on the SamplePDF · 148 KB · Original document (Turkish)
Download PDF

Document No: PRS.15 · First Issue Date: 24.05.2025 · Revision Date/No: 07.09.2026/01

1. Purpose and Scope

The purpose of this procedure is to manage the transport, receipt, rejection, coding, handling, storage, preservation, retention, return and disposal of samples submitted to the AFMER KİMYA A.Ş. laboratory for analysis, in accordance with the requirements of TS EN ISO/IEC 17025 Clause 7.4, in order to protect their integrity, security and traceability.

This procedure covers all internal and external customer analysis samples submitted to the AFMER KİMYA A.Ş. laboratory.

2. Definitions and Explanations

Handling: Stacking, relocating, transferring from large containers to small containers, renewing containers and mixing the item of analysis without changing its essential characteristics.

Item: Analysis Sample

3. Responsibilities

Laboratory Manager: Responsible for ensuring the physical/environmental suitability of sample receipt and storage areas, approving sample acceptance decisions in doubtful cases and managing customer information processes.

Quality Manager: Responsible for auditing the implementation of the sample traceability procedure and verifying that sample records comply with QMS standards.

Sample Receipt Personnel: Responsible for carrying out acceptance checks of samples, applying rejection/acceptance criteria, completing forms FRM.36, FRM.68 and FRM.68.1, coding samples, storing them under appropriate preservation conditions and carrying out disposal/return operations.

4. Acceptance and Rejection Criteria for Samples

Analysis requests are received in accordance with PRS.14 Review of Requests, Tenders and Contracts Procedure.

Acceptance checks of samples delivered to the laboratory are carried out by the Sample Receipt Personnel.

Delivery of samples to the laboratory is the responsibility of the customer.

Sample Acceptance and Rejection Criteria Check Steps:

  1. Packaging and Physical Integrity: The sample packaging must be free of leaks, breakage, spillage or contamination.
  2. Minimum Sample Quantity: The quantity of the incoming sample must meet the minimum quantity required for the analysis method and replicate testing defined in the FRM.59 Scope of Services document.
  3. Identification and Labelling: The information on the sample container must match the FRM.36 Analysis Request Form exactly.
  4. Transport Environmental Conditions: It must be verified that temperature-sensitive samples have been delivered in a cold chain or in suitable transport containers.

Samples that do not meet the specified requirements are rejected immediately and the customer is notified in writing or verbally.

Where a sample deviates from the specified requirements (e.g. insufficient quantity, packaging deformation, etc.) but the customer still insists on the analysis being performed, written approval is obtained from the customer and a disclaimer stating that ‘the results may be affected by deviations at sample acceptance’ is added to the Test Report to be issued.

5. Numbering and Coding of Samples

Each accepted sample is assigned a unique Sample Request No / Analysis Code to prevent mix-ups.

The sample coding structure is determined according to YYXXX or the standard traceability format (YY: last two digits of the year, XXX: sequential number starting from 001).

The assigned sample code is recorded on the FRM.36 Analysis Request Form.

The Sample Request No / Analysis Code is preserved unchanged in all equipment records, raw data sheets and the FRM.66 Test Report used during the analysis process, so as to ensure uninterrupted traceability.

6. Storage and Preservation Conditions of Samples

Samples whose acceptance procedures have been completed are stored, until the analysis stage and after analysis, in sample storage cabinets/cases that comply with the temperature and environmental conditions specified in the Standard Operating Instructions (SOI).

Samples whose analysis has been completed are retained for 30 working days from the report date, unless otherwise specified in writing in the contract with the customer.

If the customer requests storage for longer than 30 working days, an additional preservation protocol is applied.

7. Return and Disposal of Samples

Samples whose retention period has expired or whose return is requested by the customer are handed over against signature via the FRM.36 form.

Chemical/analysis samples whose return is not requested and whose retention period has expired are disposed of safely in accordance with the Hazardous Waste Management Instruction and environmental legislation.

8. Protection of Customer Property

Samples delivered to the laboratory are regarded as customer property.

During the period from acceptance of the samples until their disposal/return, the necessary security and environmental measures are taken against the risks of deterioration, loss, damage or theft.

In the event of any adverse situation, the customer is immediately informed in writing and action is taken in accordance with PRS.10 Control of Nonconforming Analysis Work Procedure.

9. Related Documents and Record Traceability

The related records and documents used within the scope of this procedure are as follows:

  • FRM.36 Analysis Request and Sample Receipt Form
  • FRM.59 Scope of Services Document
  • FRM.66 Test Report
  • FRM.68.1 Analysis Request Sequence
  • PRS.01 Control of Documents Procedure
  • PRS.02 Control of Records and Software Security Procedure
  • PRS.10 Control of Nonconforming Analysis Work Procedure
  • PRS.14 Review of Requests, Tenders and Contracts Procedure

10. Revision History

Revision NoRevision DateNature of Revision
0024.05.2025First Issue
0106.04.2026Responsibilities and sample acceptance process steps updated.
0207.09.2026Following the TÜRKAK audit, sample acceptance/rejection criteria, deviation notifications and disclaimer principles, the traceable coding structure, property protection and the FRM.59 scope of services reference were updated.

Prepared by: Quality Manager · Approved by: General Manager